Home / Operations, Contracts & Scale

Operations, Contracts & Scale

The economics chapter tells you whether the numbers work. This one is about actually running the thing: how many person-days a hectare really takes, how to turn seedlings into your first enterprise, what to put in writing before you load the truck, and what a malunggay business looks like at three different scales.

On this page
  1. The labour calendar
  2. The nursery and seedling enterprise
  3. The buyer toolkit
  4. Three farms, three scales
  5. What changes as you scale
⚠️ How to read the numbers here

Every figure in this chapter is a planning placeholder, in the same spirit as the economics budgets. Wages, yields, germination rates and local prices move. Use the tables to structure your own costing, then replace each number with the one you measured on your own farm — the method for doing that is part of the point.

Scale-up ladder diagram with six rungs: household, surplus, contract, process, certify, and volume, each adding a capability on top of the previous one
Fig. 1 — The scale-up ladder. Each rung adds one capability, and each rung has to pay for itself before the next makes sense. The rungs that break new entrants are the jump from surplus to contract without a measured unit cost, and the jump to process before there is volume to fill a dryer.

1. The labour calendar

Labour is usually the largest cost line in a moringa enterprise and the least carefully managed one. The reason is structural: a leaf block is not a steady job, it is a series of peaks. Planting and establishment are front-loaded into year one, harvests arrive as bulk events every 60–75 days, and drying collides with everything else when the wet season arrives.

OperationWhen it happensIndicative man-days / ha / year
Land preparation, layout, plantingYear 1 only25–35
Weeding and maintenanceWeekly for the first 8–10 weeks, then monthly30–45
Mulch and fertilizer rounds4–6 rounds across the year12–20
Irrigation managementContinuous through the dry season10–25
Harvest: cut, strip, bag5–6 cuts25–40
Steady-state total, selling fresh leaf—≈ 110–165
Drying, milling and packingPer batch, only if you process40–80
Total, if you also process to powder—≈ 150–245
Indicative ranges for a 1 × 1 m leaf hedge under good management. Cross-check: the ½-ha budget in the economics chapter carries roughly ₱28,000 of hired labour, which at ₱350–450 a day is about 60–80 man-days — doubling to a per-hectare basis lands squarely inside this range.

Measure your own stripping rate — it sets your harvest cost

Of all the numbers above, the one that varies most between farms is stripping: separating leaf from stem after cutting. It is also the operation most likely to be the bottleneck, because it happens in a concentrated burst and the product's quality depends on finishing it fast.

Where the peaks hurt

⛰️ Harvest week

A cut is concentrated work over two to four days, repeated five or six times a year. Plan who else can be called in before the week arrives, or quality suffers at the last metre of the block.

🌧️ The wet-season clash

When harvest and drying land in the same week, labour is short and the drying is slow — the worst combination for quality. Covered or mechanical drying (see drying) shortens the labour and improves the result at the same time.

🌱 Establishment

Weeding is 30–45 man-days a year, and most of it falls in the first eight weeks. Thick mulch is the cheapest way to buy those days back.

💧 Dry season

Irrigation is a repeated attendance cost, not a one-off task. If water is pumped by hand or by fuel, this is also where your cash costs spike.

2. The nursery and seedling enterprise

Planting material is the natural first enterprise for a malunggay farm, for reasons that have nothing to do with peak yields. It needs almost no land, it cycles in weeks rather than months, it brings in cash while your production block matures, and every new moringa grower in your province becomes a customer — including the ones the site's own budgets describe, who need several thousand plants to start.

What you can sell

ProductAdvantagesWatch out for
Bagged seedlingsStrong taproot, best establishment and the easiest for buyers to plant; highest price per pieceBulky and heavy to transport; needs nursery space and daily watering
Bare-root seedlingsCheaper to move; good for nearby buyersRoot shock if handling is rough or the trip is long
Hardwood cuttingsCheapest to produce, fastest to first harvest, clone the mother plant exactlyShallow roots — a poor choice for exposed or typhoon-belt sites (see seed versus cuttings)
SeedLight, easy to post, no nursery at allViability falls quickly in humid storage; germination varies; identity depends on your mother tree
Price reference points for planting material sit in the price landscape, and the production methods are detailed in propagation.

The unit economics of 1,000 seedlings

Cost itemNotesIllustrative cost (PHP)
Seed or cutting stockDepends whether it comes from your own trees — the biggest single lever500–2,500
Potting mediaRoughly 1:1:1 soil, compost, sand; make it yourself where you can1,500–3,000
Bags or traysReusable trays cut this sharply after the first cycle1,000–2,500
Nursery labourFilling, sowing, watering, grading, hardening off2,000–4,000
Water and shadeWith the nursery structure amortised over cycles500–1,500
Cost per 1,000 seedlings—≈ 5,500–13,500 (₱6–14 each)
Sale priceFarmgate range per the economics chapter10–50 each
Illustrative only. Note the honest implication: at the bottom of the price range with costs at the top, this enterprise loses money — which is why nursery work pays only at volume, with your own seed, cheap media and your own labour.
🌱 The nursery's real asset is trust

Planting material is sold once and judged for years: a seedling that fails is remembered as your failure, not the buyer's. Three habits protect that: sell material from identified mother trees (the lookalike check exists because mix-ups are common), state the propagation method and the age of the stock plainly, and refuse to sell cuttings into a typhoon-belt site where a taproot is what the buyer actually needs. Check with the Bureau of Plant Industry whether selling planting material at scale brings you under seed-dealer registration.

3. The buyer toolkit

Most small processors lose money not on the farm but at the boundary between them and the buyer — a delivery rejected on an unstated standard, a price renegotiated after harvest, a payment that slips two months. Three documents prevent nearly all of it, and none of them needs a lawyer for a routine local sale.

The one-page quality specification sheet

This is the document that ends arguments, because it turns "good quality" into numbers both sides agreed to before the first delivery. Attach it to every quotation and reference it in every purchase order.

FieldExampleWhy it matters
Product and gradeDried leaf powder, food grade, bright greenDefines exactly what is being traded
Lot codeBLK2 / 2603-14 / SUN-07 / M-114The buyer can trace a problem back; see lot coding
Moisture and water activityMoisture ≤ 7%; aW below 0.6The stability numbers, not a quality opinion (why)
Mesh / particle size60–80 meshPrevents a rejection over grind after milling
Microbiology and contaminantsTPC, coliforms, Salmonella, heavy metals, aflatoxinNames the test and, ideally, the accredited lab
Packaging25 kg kraft with food-grade liner, sealed, labelledSets who pays for what and how it arrives
Quantity and lead time500 kg per month, 10 days from orderStops the mismatch between expectation and your drying capacity
Price basis₱450/kg, delivered to buyer's plantChooses the Incoterms-equivalent in plain language
Payment terms30% on order, balance 15 days after acceptanceThe clause with the most effect on your cash flow
Retention sample500 g per lot, held 12 months, sealedYour only defence in a dispute

A purchase order you can reuse

PURCHASE ORDER PO-2026-041
Buyer: <processor / brand / cooperative>
Seller: <farm / enterprise>
Product: Dried moringa leaf powder, food grade, 60–80 mesh
Spec: Per Specification Sheet v2 (attached) — moisture ≤ 7%, aW < 0.6
Quantity: 500 kg (250 kg minimum acceptable)
Unit price: PHP 450.00 / kg
Total: PHP 225,000.00
Delivery: On or before 15 Apr 2026, delivered to <address>
Payment: 30% on order; balance 15 days after acceptance
Inspection: Buyer may sample and test on receipt; rejection per clause 5
Signed: ______________ (buyer) ______________ (seller)

Keep it to one page and one lot. A purchase order is not a supply agreement — it records one transaction, which is exactly why it is useful before you trust each other with anything longer.

The supply agreement: the clauses that actually get argued about

  1. Parties and goods. Name the product by reference to the specification sheet, never by description alone. Specification sheets change; a defined revision number keeps the contract honest.
  2. Term and volumes. Monthly minimum and maximum, with the consequences of missing either. Your wet-season capacity is the number to commit to, not your peak flush.
  3. Price mechanism. Fixed, formula-linked, or market-referenced. This is the most negotiated clause in any moringa contract — the cost-plus worked example shows how to argue it from your own numbers rather than the buyer's.
  4. Quality and acceptance. Who samples, who tests, at which laboratory, and what tolerance triggers what remedy.
  5. Delivery, packaging and risk. Who pays freight, and at which point the product becomes the buyer's problem.
  6. Payment terms. In writing, with dates. A 30-day term on a 15-day production cycle is a financing arrangement you are providing for free.
  7. Rejection and rectification. What happens to a rejected lot — return, rework, discount, or replacement — decided in advance rather than during a dispute.
  8. Records and traceability. Retention samples, lot records, and the right to audit. The compliance chapter's logs already generate these.
  9. Force majeure — write the storm in. In the Philippines this clause is not boilerplate. Name typhoons, floods and drought, and say what happens to delivery dates and payment when they hit (see crop insurance).
  10. Exclusivity and non-circumvention. Optional; decide deliberately whether you are a supplier or a partner, and whether the buyer may approach your farmers directly.
  11. Termination and dispute resolution. Notice periods, and mediation before arbitration.
  12. Amendments in writing. The clause that saves all the others, because most disputes are about a verbal change someone remembers differently.
📄 Templates, not legal advice

These are starting structures for a small local transaction you can hold in one page. Anything long-term, high-value, or involving exclusivity, land, or a foreign buyer belongs with a lawyer — and a contract worth signing is worth the fee.

4. Farm profiles — six ways in

ℹ️ These are composites, not real farms

The profiles below are illustrative constructions built from the ranges elsewhere in this knowledgebase, not case studies of named businesses. The first three are one farm at three scales — what changes, what breaks, and what the first sensible step is as the enterprise grows. The last three are three different situations: no spare land, no title, and no sales at all. Most readers will recognise themselves in one of the six.

🏠 Backyard🌿 Half hectare🏭 Five hectares + processing
SystemFence row and a small hedge1 × 1 m leaf hedge, hand toolsHedge blocks plus dryer, mill and pack line
ProductHousehold supply, surplus to neighboursFresh leaf to traders and processorsPowder under contract, own brand
CapitalSeed and a boloTens of thousands of pesosMillions: land, buildings, equipment, working capital
LabourThe householdMostly family, hired at harvestEmployees, supervisors, a pack team
First incomeImmediately, in foodMonth 3–4, real income in year 2After certification and a first contract
Main riskNone — which is why to start herePrice and no irrigationQuality consistency and cash cycle
The three situation profiles below sit outside this table: they are not points on the same scale line, but different starting conditions entirely.

🏠 The backyard

A boundary row and a small hedge, cut for the kitchen and shared with neighbours. There is no business plan, no certification, and nothing to lose. It is also the step that teaches the plant: you learn the cut interval, the regrowth rhythm, and how much leaf a household actually uses, all at a cost of a few pesos of seed. Run the calculator's fence preset to price your own boundary before assuming it cannot matter — most households discover that their fence row is a real, if modest, income line.

🌿 The half hectare

This is the profile the ½-ha budget describes: a 1 × 1 m hedge, first cut at month 3–4, then every 70 days, selling fresh leaf at farmgate. Net cash income lands in the region of ₱7,000 in year one and about ₱71,000 in year two at ₱15/kg — with the caveat that year one is an establishment year, not a business. The two ways it fails are both avoidable: no buyer secured before the first big flush, and no irrigation going into the dry season.

🏭 The five-hectare processing operation

At this scale you are not a farmer — you are a manufacturer with a farm attached. Powder sells wholesale in the ₱300–800/kg band depending on quality and certification, and the margin lives in processing, compliance and contracts, not in hectares. The binding constraints change completely: aggregation and quality consistency displace yield as the main worry, working capital lengthens because you pay for inputs and labour months before a payment lands, and every delivery is now judged against a specification. The failures at this scale are organisational, not agronomic.

Three more ways in

🌴 The intercropper — no new land

The most common real-world entry into moringa in the Philippines is not buying land; it is using ground that is already yours and already under something else. A grower with half a hectare of coconut puts moringa in the open alleys and along the access path, keeps the palms, and treats the leaf as an additional income line rather than a new enterprise. Capital outlay is cuttings, labour and compost — no land purchase, no new machinery. What makes this profile work is that the moringa can be cut on a cycle that fits around the coconut work, and what makes it fail is shade: a row planted in the shadow of a mature canopy produces stubbornly little, and no amount of fertilizer corrects it. The design questions — alley width, root competition, where the light actually falls through the year — are the whole of the agroforestry chapter.

First sensible step: walk the grove at three times of day, mark the sunny alleys, and plant one row in the best of them. Prove the cut cycle on one row before committing to a hectare of rows.

🤝 The cooperative grower — land without capital, volume without scale

A grower with a third of a hectare, no equipment beyond hand tools, and no realistic prospect of funding a dryer alone plants a leaf hedge and supplies a processor through a cluster or cooperative that pools volume, negotiates one contract and shares drying facilities. Individually the output is too small for an institutional buyer to bother with; pooled, it is a container of leaves or a mill's weekly requirement. This is also the profile that unlocks the financing routes that need a track record and a legal borrower — a cooperative's records and collective collateral substitute for what a smallholder cannot produce alone.

The trade-off is real and worth naming: you take a lower price per kilo than a direct sale, and you accept the group's quality standard and delivery schedule as binding. In exchange you get a guaranteed buyer, shared infrastructure and access to credit. The failure mode is a cooperative with no quality discipline — one member's wet leaf can sour a pooled delivery for everybody.

First sensible step: find out which processors actually buy in your province and whether they buy through a cluster. Then agree the specification in writing before the first harvest, using the buyer toolkit.

🏫 The institutional garden — success measured in meals

A school, barangay or church garden grows moringa for a feeding programme, with surplus sold to the canteen or to families. There is no commercial plan and no certification; there is a planting calendar tied to the school year, a set of hygiene rules because the food is fed to children, and a harvest that has to arrive when the kitchen needs it. Financially this profile is not a business — the economic return is the food itself, plus whatever the canteen purchases. Its value is different: it is where a great many people first learn to grow and cook the plant, and where the demand for seedlings originates.

What this profile needs from this chapter is only the boring part: a cut interval that fits school terms, and a harvest-and-wash routine that stands up to a parent or a teacher asking how the leaves were handled. The growing and food-safety detail is in Growing at Home.

First sensible step: plant ten to twenty trees, not a block. A garden that cannot keep up with a small planting produces nothing, and a school garden's most common failure is ambition, not neglect.

5. What changes as you scale

Scale does not multiply the small farm; it replaces parts of it. Four things change qualitatively rather than proportionally.

📒 Records become the operating system

On a backyard fence row, records are optional. At half a hectare they save you money. By five hectares they are the business — they are how you price, defend a lot, satisfy a buyer and claim insurance.

💵 Working capital lengthens

Small sales settle in cash the same week. Contracted powder sales settle in 15–60 days against inputs paid months earlier. The gap, not the margin, is what runs out first.

👷 Labour becomes supervision

The skills that made the small farm work — knowing when the flush is ready, cutting to the right height — have to be taught to people who did not raise the plants. Training and written procedure replace instinct.

🎯 Quality variance becomes the enemy

A household can absorb an off batch. A contract buyer cannot. Consistency — the same colour, moisture and mesh every delivery — is what the premium is really paid for.

✅ The scale-up checklist

Before each rung of the ladder: (1) is there a buyer for this volume, not just a market? (2) is the unit cost measured rather than assumed? (3) do the records already exist from lot one? (4) is the compliance step being taken in the right order — facility, then licence, then product? (5) does the new equipment pay for itself before the volume exists, or after? If any answer is "we will work it out later", the rung is not ready.